Home  |   HomePage  |   Favorites
 HOME   ABOUT  PRODUCT PERFORMANCE PROCESSES  NEWS  CONTACT CHINESE
PRODUCT LIST
The reaction was stirred e…
    Stainless steel reacto…
    Semi-coil reactor
    Unsaturated resin
Cooled heat exchanger equi…
    Condenser tube
    Spiral plate heat exch…
    Heat sink
    Water cooler
Towers and tower pieces eq…
    Alcohol recovery tower…
    Gauze packing
Muffler noise insulation
    Muffler
    Soundproofed room
    Tube cold oil machine
Evaporation drying
    Scraper film evaporato…
    Flaker dryer
    Rake dryer
    Concentrated under red…
    Double-effect evaporat…
Fermentation extract filtr…
    Air-cooled unit
    Multifunctional extrac…
Storage of oxygen equipmen…
Aluminum equipment
    Aluminum cans
Vacuum device
Oil cooling equipment
Air-cooled unit

Wuxi Weicheng Pharmaceutical and Chemical Equipment Co., Ltd.
Contactor:  Miss Zhu  +86 13921172135    E-mail: wxmingshi@163.com
                      Mr Li 001-604-2725288
Tel           :  001-604-2725288
http          ://www.wcyhjx.com
 
PROUDCT Home>>Product
Rake dryer
Has a simple structure, convenient operation, long life cycle, stable and reliable performance, small steam consumption, strong applicable performance, product quality, especially for not high temperature, dry flammable, easily oxidized under thermostat paste materials, the aircraft proved by the user is a good long-term use of drying equipment. Principle: Founder dried material from the casing to join the middle, in the positive and negative stirring constantly rotating rake teeth, material axially back and forth, in contact with the housing wall surface constantly updated by indirect heating steam, rake teeth stir, smash smash rod to make the material more favorable surface water discharge, water vaporized by dry scrubbers, wet scrubbers, condensers, vacuum pumps at the exit from the vent. Structure: The main components of the vacuum rake dryer.
1, case 2, rake teeth 3, a feeding device 4, feeding device 5, grinding rods
6, the sealing device 7, a stirring shaft 8, the drive means

Applicable materials
Muddy high pasty 100 mesh material of various pigments, clay-like material filter head and filter centrifuge and soda ash detergents, Base stone starch, dyes and pigments, such as clay and clay and cement gray

Under appropriate conditions applied
100 mesh material was synthetic, crystalline vacuum, emulsions sweet potato slices, ores and other suspension

Model and technical characteristics
The main parameters Model Nominal volume Heat transfer area A charge Absolute operating pressure Operating temperature Spindle speed Material Weight Motor Power Dimensions L × W × H
Cylinder body Jacket
XPG0.5 0.5 1.86 0.2 0.021 0.686 435 15-20     Note:3  
Auxiliary:5.5
XPG1 1 6 0.75 0.021 0.686 435 9 A3 3400 5.5 3700×945×3270
1Cr18Ni9Ti 3300
XPG2 2 8 1.2 0.021 0.588 425 9 A3 4900 11 4570×1130×3455
1Cr18Ni9Ti 4800
XPG3 3 11.5 11.5 1.021 0.588 425 9 A3 6400 15 6076×1130×2980
    
 
 Home   About  Product Performance Processes  News  Contact
COPYRIGHT © 2014 Wuxi Weicheng Pharmaceutical  and Chemical Equipment Co., Ltd.
Contact:Miss Zhu 13921172135 Mr Li 001-604-2725288 Tel:001-604-2725288 http://www.wcyhjx.com  Su ICP is the record ...